Page 1 of 1

Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software

Posted: November 6th, 2019, 9:03 am
by Madao123
Hello people.

I have reparied TDS640,of course capacitor plague.
But NVSRAM is corrupt und i am needed dump of functional TDS640.
Do exist TDS600 field adjust software?


Thanks.
Matt

Re: Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software

Posted: November 8th, 2019, 10:34 pm
by Madao123
I got NVSRAM Dump.

I am again needing field adjust software.

Regrads
matt

Re: Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software

Posted: November 18th, 2019, 10:49 am
by fenugrec
google gives
https://www.eevblog.com/forum/testgear/ ... #msg539818
which has links for different versions which may need to be tested.

Re: Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software

Posted: November 24th, 2019, 5:01 am
by Madao123
Solved, i got modified FAS .

Re: Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software

Posted: January 29th, 2020, 3:17 pm
by fenugrec
Madao123 wrote:
November 24th, 2019, 5:01 am
Solved, i got modified FAS .
Excellent.
What do you mean by "modified FAS" ?

Re: Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software

Posted: February 25th, 2020, 9:45 am
by Madao123
Mofication of Tek FAS ist minor, from eevblog
Attached below is TDS600A.ADJ Field Adjustment Software. To add support for TDS640 (plain, no letter) to TDS600A.ADJ after installation:

Open directory TDS600A.ADJ

Edit DUTLIST. There are three entries, TDS620A, TDS640A and TDS644A
Add TDS640 below the last entry, save and close file DUTLIST.

It is necessary to make a copy of file Tds640a.con, and name the copy Tds640.con
Also, make a copy of file Tds640a.idx, and name the copy Tds640.idx

It is not necessary to edit either file copy. With these steps, I have successfully calibrated a TDS640 on the first attempt.
Greeting
matt