Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

sin(x)/x filter VISA command in AWG5202

Programming examples for remote communication with instruments
C/C++, C#, Python, Matlab, LabVIEW
Post Reply
Posts: 1
Joined: April 8th, 2021, 12:30 am
Country: France

sin(x)/x filter VISA command in AWG5202

Post by supersibas11 » April 8th, 2021, 12:43 am

Dear all,

I'm implementing some VISA commands over an AWG5202. I don't find the VISA command to activate the sin(x)/x filter (page 65 of the AWG5200 printable help document).

I hope to be wrong but I don't see such command on the programmer manual. I tried also checking on the AWG7000 manual, but I don't find it neither.

There is only one section mentioning the filter on both manuals: WLISt:WAVeform:ACFile:RSINc, but this one seems to be used to apply the filter on .wfmx files and not at the channels output, like explained on the aforementioned page 65.

Thanks in advance for your help.


Tektronix Applications
Tektronix Applications
Posts: 157
Joined: December 2nd, 2008, 2:27 pm
Country: United States

Re: sin(x)/x filter VISA command in AWG5202

Post by w2aew » April 8th, 2021, 6:05 am

The command you're looking for is:
[SOURce[n]:]SDCorrection {OFF|ON|0|1}

Post Reply

Return to “Remote Instrument Communication (Programming) Examples”

Who is online

Users browsing this forum: No registered users and 2 guests