Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Waveform Recall from CSV

TekScope Anywhere
Post Reply
Posts: 1
Joined: March 12th, 2019, 1:02 am
Country: Spain

Waveform Recall from CSV

Post by eneko.fernandez » March 12th, 2019, 1:05 am

I saved a capture with two active channels in my oscilloscope and when trying to recall the waveforms in the software only CH1 is recalled.

I have opened the csv file and I can see that there are data from both channels (CH1 & CH4)

Dave W
Tektronix Applications
Tektronix Applications
Posts: 334
Joined: April 26th, 2010, 12:01 pm
Country: United States

Re: Waveform Recall from CSV

Post by Dave W » June 28th, 2019, 10:09 am

Unfortunately this is a limitation of the software and you will need to break the file into two seperate CSV files, one for each channel. Since .CSV is plain text and can be opened in programs like Excel or Open Office / Libre Office Calc, it is not too difficult to do. Make a copy of the .CSV file and open it then move the contents of the CH4 column over the CH1 column and save.

Post Reply

Return to “TekScope Anywhere”

Who is online

Users browsing this forum: No registered users and 2 guests