Page 1 of 1

Tek EMCVu load from standard clarification

Posted: April 8th, 2021, 2:54 pm
by Ih8sn0w
I am trying to setup the limits for the standard CISPR 11 (EN55011) and I am not sure I am seeing what I need.
This test would be a pre compliance test for radiated emissions. The system classifications are:

Class A, Group 1, Electric Field (3m)

There is no option for this however. The closest ones I see are the following:

Table 6, Class A, Group 1, Less than or equal to 20kVA (3M)
Table 6, Class A, Group 1, Greater than or equal to 20kVA (3M)

Are these possibly the two I need? not sure what the 20kVA signifies.