Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

MSO64 Turn on Spectrum View

MSO54, MSO56, MSO58
Post Reply
mfscope652
Posts: 3
Joined: June 3rd, 2021, 11:53 am
Country: United States

MSO64 Turn on Spectrum View

Post by mfscope652 » June 3rd, 2021, 12:17 pm

Does anyone know the specific commands to turn on the Spectrum View on an MSO64 scope? I have not had luck getting that display to turn on, I know it is simple I have just not found the right command in the programming guide.

Thanks

w2aew
Tektronix Applications
Tektronix Applications
Posts: 171
Joined: December 2nd, 2008, 2:27 pm
Country: United States
Contact:

Re: MSO64 Turn on Spectrum View

Post by w2aew » June 3rd, 2021, 1:43 pm

CH<x>:SV:STATE
This command sets or queries the on/off setting of data acquisition for the specified spectrum trace channel.

Syntax CH<x>:SV:STATE {ON|OFF}
CH<x>:SV:STATE?
Arguments CH<x> specifies the spectrum trace channel source.
ON enables spectrum data acquisition for the specified spectrum trace channel source.
OFF disables spectrum data acquisition for the specified spectrum trace channel source.
Examples SV:CH1:STATE ON turns on Spectrum View data acquisition for the channel 1 spectrum trace.
SV:CH3:STATE? might return OFF, indicating that Spectrum View data acquisition is turned off for the channel 3 spectrum trace.

mfscope652
Posts: 3
Joined: June 3rd, 2021, 11:53 am
Country: United States

Re: MSO64 Turn on Spectrum View

Post by mfscope652 » June 3rd, 2021, 2:59 pm

Much appreciated thank you I'll give this a shot.

Post Reply

Return to “5 and 6 Series MSO Oscilloscopes (including 5 Series Low Profile)”

Who is online

Users browsing this forum: No registered users and 1 guest