Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

MSO58: save decoded data on trigger

MSO54, MSO56, MSO58
Post Reply
Posts: 1
Joined: January 4th, 2019, 2:23 am
Country: Germany

MSO58: save decoded data on trigger

Post by timopirr » January 4th, 2019, 2:49 am


I would like to save on trigger decoded data from a RS232 bus (baud=115200). The data comes 10x every second with 32byte data each package. The triggering and decoding works fine so far, but the saving options are pretty limited.

Is there a way to save (only the) decoded data in a csv-File in the following scenario?
The csv-File will be opened when the aquisition starts. The data on every trigger will be saved in a new row or column. The csv-File will be closed when the aquisitions ends.

I use firmware version: (2018-07-16)

Thanks in advance

Post Reply

Return to “5 and 6 Series MSO Oscilloscopes (including 5 Series Low Profile)”

Who is online

Users browsing this forum: No registered users and 1 guest