Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

DMM scaning and 7706 digital output.

Post Reply
Posts: 1
Joined: August 16th, 2016, 9:57 am
Country: Canada

DMM scaning and 7706 digital output.

Post by careframe » August 16th, 2016, 10:12 am

We brought an Used Keithey 2700 with 7708 and 7706

I'm looking to send conditional binary output to 7706 chanel 21 and 22 with Excelinx to control relay operated power bar. when the test is finish and stop DMM Scan.

Can you help me if it possible to setup alarm or other thing.

We make burning test on woodstove and sometime Test finish after the end of the shift when scale return to the initial condition and we want to cut power to sample pump and other critical sampling probe.

Tanks in advance

Dale C
Keithley Applications
Keithley Applications
Posts: 2849
Joined: June 10th, 2010, 6:22 am
Country: United States

Re: DMM scaning and 7706 digital output.

Post by Dale C » August 16th, 2016, 1:20 pm

Here is the manual for the 7706. that discusses the digital I/O and limits.
(1.76 MiB) Downloaded 1437 times

Post Reply

Return to “Series 2700 Multimeter/Data Aquisition/Switch System”

Who is online

Users browsing this forum: No registered users and 5 guests