Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

2701 Cont function - KickStart

Post Reply
zvikaef
Posts: 10
Joined: June 9th, 2016, 2:57 am
Country: Israel

2701 Cont function - KickStart

Post by zvikaef » November 30th, 2017, 12:24 am

Hi.
using the 2701 + 7700 and KickStart, when selecting the CONT function an unhandled exception error. please advise

Jennifer C
Keithley Applications
Keithley Applications
Posts: 48
Joined: September 17th, 2010, 7:55 am
Country: United States

Re: 2701 Cont function - KickStart

Post by Jennifer C » December 8th, 2017, 2:00 pm

Hi Zvikaef,

I apologize for the tardy reply, The CONT function on the 2701 in KickStart is a known bug. However, the CONT function was primarily designed for front panel use with the 2701 as it indicates via audible sound ("beep") if continuity is detected. As a workaround, you may instead use the 2W resistance function to gather resistance readings on your devices and you may set limits on the channel for resistances that you would consider as "short" and "open".

Regards,

Jennifer C

Post Reply

Return to “Series 2700 Multimeter/Data Aquisition/Switch System”

Who is online

Users browsing this forum: No registered users and 1 guest