Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

DMM4050 remotely power control

Post Reply
MR.Smith
Posts: 1
Joined: April 12th, 2017, 5:48 am
Country: Russian Federation

DMM4050 remotely power control

Post by MR.Smith » April 12th, 2017, 5:51 am

Hello!

We have a DMM4050 Multimetr. It is possible to remote power control for this device? We would like to power on and turn off it remotly (via Ethernet, RS-232 etc.)

Is possible to configurate this device for auto power on when AC power cord is pluged?

We are need any way to power on device without pressed "power button" on front panel.

Best regards.

Andrea C
Keithley Applications
Keithley Applications
Posts: 1262
Joined: October 15th, 2010, 10:35 am
Country: United States
Contact:

Re: DMM4050 remotely power control

Post by Andrea C » April 20th, 2017, 12:48 pm

Sounds like you need a meter with a mechanical power switch which you leave in the ON position.
Then power it or not by programmable UPS.
Consider a Keithley model 2000.

Kiriakos
Posts: 9
Joined: September 1st, 2018, 11:27 am
Country: Greece
Contact:

Re: DMM4050 remotely power control

Post by Kiriakos » February 11th, 2019, 1:26 pm

This is a very interesting question , enabling Power Save mode remotely, extending display life-cycle.

I think that if SignalExpress does not support such function, then possibly now one bothered to implement such a command into it firmware.
DMM4050 firmware never updated since 2011 and now we are in 2019.

Post Reply

Return to “Other DMM's”

Who is online

Users browsing this forum: No registered users and 3 guests