Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
I just got a used 2015 THD DMM.
I was wondering if it basically is a 2000 with a THD addon.
The reason is that there isn't much info or forum entries for the 2015 , and i was wondering if i could also use the info from the 2000 forum.
It's doing burn in test right now , using a Geller 10v reference.
And is actially closer to the 10v (9.99992v) than my Agilent 34401a (9.99978v)
- Keithley Applications
- Posts: 2841
- Joined: June 10th, 2010, 6:22 am
- Country: United States
The Model 2015 has he THD function and that separates it from the Model 2000.
So all other functions can be used as a Model 2000.
Thank you for the ansver.
I'll have a look in the 2000' forum.
I have goofed in my Geller Reference measurements (by connecting 3 meters at the same time to the reference).
I got an advice from Joe geller, about only conecting one instrument at the time ...
And the Keithley hit the magic number (- further down) ....
http://www.eevblog.com/forum/reviews/ke ... #msg213755
The 2015 is spot on , and my 34401A is 7 ppm off.
Not bad for a Volt-nut beginner (hobbyist)
Who is online
Users browsing this forum: No registered users and 1 guest