keithley 2400 and 2182 delta mode measurement

Post Reply
mozildori
Posts: 1
Joined: July 18th, 2017, 8:06 am
Country: Germany

keithley 2400 and 2182 delta mode measurement

Post by mozildori » July 18th, 2017, 8:18 am

Hello. I have a question about the delta mode measurement using 2400 and 2182.

It was okay at the beginning to operate but for some reason the measurement was not conducted, frozen and gave an error message 410 in the 2182 display.

When I started the delta mode measurement, the 2400 was not sweeping the current values that I gave (e.g. 10uA and -10uA) but frozen at one value (e.g. 10uA). Of course the 2182 cannot get any inputs from 2400 so finally it gives an error message 410.
when I changed the 2400 to another, it was operated at first but the problem happened again.

Please help me !

Post Reply

Return to “Resistivity Measurements”

Who is online

Users browsing this forum: No registered users and 1 guest