Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Data Acquisition at 100 Hz using Keithley 2100 6.5 Digit Multimeter

Post Reply
hamiltm
Posts: 1
Joined: March 4th, 2019, 6:37 pm
Country: Canada

Data Acquisition at 100 Hz using Keithley 2100 6.5 Digit Multimeter

Post by hamiltm » March 4th, 2019, 6:48 pm

Hi everyone,

I am trying to record resistance data at 100 Hz (100 samples/second). While a frequency of 2000 rdgs/s is shown on the spec sheet, I am not sure how to achieve this. I have used the add-on for excel (can't collect at high frequency repeatably), and am working on a VI in Labview.

Can you please describe how to collect data at 100 rdgs/sec (with timestamps for each data point), on Labview or another platform? Is this even possible? I am suspecting I will need to acquire multiple samples per trigger to achieve the high data collection rate, but don't know how to get corresponding time-stamps.

Cheers!

Post Reply

Return to “Resistivity Measurements”

Who is online

Users browsing this forum: No registered users and 2 guests