Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
I want to control the keithley using LabView 2013 program. I started with ke485 driver but after long time trying to get it work I got only frustration. . From discussion on the NI board and here, it seems the driver is old and does not support keithley 6487 instrument. So, I gave up this driver.
Now I found on this board that 6514 driver is close to 6487. this the link(http://forum.keithley.com/phpBB3/viewto ... t=29040).I want to know if somebody have tried it before and happy to share his experience. Does the driver need modification to work with 6487 or it is plug and play.
Also, if you now something better, please let me know.
Many thanks in advance
http://www.keithley.com/support/keidoc_ ... are+Driver
Please have a look at the drivers' release notes chapter 2 - here the system requirements are stated.
Models 6485, 6487, and 6514 IVI/VISA-based Driver for Visual Basic (VB), VC/C++, LabView (LV) & LabWindowsCVI (v5.5) Ver.B04 - Requires Installation of Keithley I/O Layer (KIOL-850) .
Who is online
Users browsing this forum: No registered users and 2 guests