Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

2400 Overtemp error

Models 2400, 2401, 2410, 2420, 2425, 2430, 2440, 6430
Post Reply
Posts: 5
Joined: January 20th, 2011, 7:21 am
Country: United States

2400 Overtemp error

Post by Strider » January 20th, 2011, 8:02 am

I have a Model 2400 that intermittently shows Overtemp error.
The unit is warm to the touch but not "hot".
I can cycle power to the unit and it clears the condition.
What is going on?

Dale C
Keithley Applications
Keithley Applications
Posts: 2849
Joined: June 10th, 2010, 6:22 am
Country: United States

Re: 2400 Overtemp error

Post by Dale C » January 20th, 2011, 8:07 am

Revision C32 has resolved this issue.
Go to the Keithley web site and down load the FlashWizard program and the C32 firmware.
Run FlashWizard and when prompted enter the C32 firmware file.
One note... Do not interrupt line power to the unit while upgrading firmware.

Post Reply

Return to “2400 Series SourceMeter”

Who is online

Users browsing this forum: No registered users and 3 guests