Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
A general description of the usage is: a piece of metal vibrates on the surface of another metal plate, the vibration frequency is ~60 kHz and the contact region is very small (1200 µm X 500 µm). During the vibration period (~50 ms), the electrical resistance of the contact region will change. One of our goal is to measure the resistance changes.
So my question is: will the model 6221 be fast enough to provide a constant current during the 50 ms regarding that the vibration frequency is so high? If not, do you have other product options?
- Keithley Applications
- Posts: 2847
- Joined: June 10th, 2010, 6:22 am
- Country: United States
I think the only way to get the definitive answer is with a demo unit and you try it yourself to see if it can handle this application.
I would connect the local demo pool or local sales engineer in Europe to obtain a demo and give it a try.
Phone: +49 221 9477 400
Institut für Dynamik und Schwingungen
Leibniz Universität Hannover
Tel.: +49 - (0)511 / 762 - 17558
E - Mail: [email protected]
Or you might send me the contact information of your colleague with whom you've talked about this.
Who is online
Users browsing this forum: No registered users and 0 guests